Using The Concrete Cutting Saw Safely

Today many tools are available in the market to carry out masonry work quickly. The latest models enable work to be completed in a short while and they can be used to carry out a voluminous amount of tasks without fatigue. One such tool is the concrete cutting saw which can efficiently cut through concrete surfaces.

A concrete saw can cut through the most difficult forms of masonry. Not only can it easily cut through concrete material it can also be used to work through brick, tile and other similar materials. The blades are often diamond blades so that the cutting action is precise, giving required results. You can get exactly the kind of results wanted in using it. However if you want to work with it continuously and come out with successful results every time, it is essential to follow the safety rules that have been prescribed for it. Here is a look at top ten safety tips that must be followed when cutting with the concrete saw:

1.    The saw guards must be well maintained and in proper position

2.    The blades must be kept straight and right

3.    When inserting a blade into the saw make sure that it is the right one as otherwise desired cutting results cannot be obtained

4.    The blade used must not be damaged as such blades will break while cutting, resulting in ht steel pieces coming out.

5.    The saw’s power or engine must be completely turned off   before mounting a blade onto it

6.    Check the saw so that kick backs and lock- ins do not happen

7.    It is vital to use safety glasses and respirators when working so that eyes and lungs are not affected

8.    Hearing protection gear must be used to prevent ears from being affected by cutting sound

9.    Wear snugly fitting clothing  but ensure that it offers complete freedom in movement

10.    Only use wheels that have been authorized for your concrete cutting saw

By following these safety points you can be sure of getting the desired results from your concrete cut off saw  and avoiding any injury to yourself. Always inspect the condition of the saw before using it. Cutting concrete is a job that requires diligence as otherwise you will be endangering. The most important safety point is ensuring that the saw is working properly and making use of good protection gear. It is vital to follow all procedures for setting up and running the saw as given in the manual because only then will the equipment work according to your needs. While work, wearing non slip gloves is important so that you protect hands and at the same time do not lose control over the functioning of the saw.

Basic Understanding and Uses of a Cement Concrete Saw

Concrete Cutting Saws

A concrete cutting saw is a machine that used to cut through concrete material. It is powered by electricity, gasoline or hydraulics. Its powerful cutting mechanism enables you to cut through the toughness of concrete quickly and efficiently. The cutting is done by making use of an abrasive or through diamond blade cutting technology. It has the capacity to cut through wet as well as dry concrete matter. 

You can find concrete saw available in differ sizes and power capacity. The kind of saw to be selected depends on its application. The most common type of concrete cutting saw is the electric one because it is light weight, does not produce much noise and is perfect for indoor environment. It is simple to use and enables you to complete cutting task fast.

In case of small applications using a hand held saw is enough but when it comes to heavy duty cutting requirements, it is necessary to use a hydraulic concrete saw. This concrete cutting machine offers high power and also enables you to complete cutting faster. The working of this tool is similar to that of a standard power saw, except that it can withstand heat from high friction and it can also cool down rapidly. Now-a-days what is most popular is a gas powered saw because it is easy to carry around and use. However it does require regular maintenance for proper functioning.

A concrete saw can be used for a variety of purposes. It can cut through concrete for the purpose of modification or repair work. It can be used in demolition activities on concrete material and other similar types of masonry material such as brick and cement. It is the best when you want to make renovation in your home such as repairing the patio or the drive way.  It is extensively used in building construction activities when portions have to cut through cement walls. It is also very handy in road repair jobs where it cuts through asphalt or concrete roads that needs to be repaired or replaced.

You can get the best results from this power tool by making use of advanced models. The newer models are easy to use and they are also energy efficient.  They offer precision cutting and do not demand heavy maintenance. When making use of a concrete cutting saw it is vital to wear protective gearing because the dust that comes from cutting is dangerous for health. The dust can be controlled by using making use of wet cutting and switching over to diamond saw blade instead of abrasive wheels.  When buying a concrete saw, opting for the latest models is advisable because of their high speed in cutting and greater accuracy in results.

How Do I Choose the Best Sand Blasting Unit?

A sand blasting unit is used to clean concrete and metal surfaces. The device  works by mixing water and sand particles and  blasted it at high pressure to remove unwanted elements such as dirt, grime, paint, graffiti on the surface to  make it clean.  The cleaning results from a sandblaster are very good because of the high velocity at which sand is blasted on the surface that has to be cleaned. 

In addition to cleaning, this equipment is used also for glass decoration. The cost of sandblasting equipment depends on its size and performance level. A unit that comes with a cabinet and which is capable of managing large glass particles will be more expensive than a small sand blasting system.

How to Find Sandblasting Equipment Suitable For Your Needs?

Sand blasting units are expensive so you must be prepared to shell out a handsome amount to buy one. Industrial grade sandblasting equipment is available in varying price ranges and you can buy one according to your requirement and budget limit.  Here is the checklist to identify the right sand blasting unit that will suit your requirement:

• Check if you need a wet or a dry blaster. A wet blaster works slowly and does not cause much dust. It is suitable for use in enclosed spaces. On the other hand a dry blaster will create a lot of dust while working but will finish the job very fast.
•  Find out the power of your air compressor because it must be able to provide the right amount of power to the sandblaster to carry out its work.  The pressure requirements of your sandblaster must match with the power capacity of your air compressor otherwise the unit will not work.
•  Look into the equipment size and portability aspect. Small size is suitable for small areas while large sandblaster is suitable for large spaces. In case you want to move around with the machine, a backpack style will be right.
•  The sandblasting pressure from the machine must be suitable for the work you are carrying out. In case of jobs such as removing paint and cleaning, a 3,000 to 3,500 psi or pounds per square inch is necessary.
• If you are comfortable with a basic type of sand blaster, a gravity-fed system will be fine. On the other hand, when you need to do extensive work a more complex and expensive system is required in which case you should opt for a pressurized sand blaster.

Since there are quite a few models available, it is important to consider all the above aspects including the price before finalizing on one.  It is always best to go in for the latest equipment model so that you get the best cleaning results and safety facilities.

Use and Safety of Using a Meat Cutting Band Saw

Smaller pieces of meat are always easy to manage. As cutting large chunks of meat is a daunting task, one always requires the help of a tool. Meat cutting band saws are generally used to cut meat. Since the demand for meat is increasing in the recent days, the demand for meat saw is also increasing. You can find different types of meat saws available in the market. Each and every tool is designed according to the purpose of the user. The best thing about the meat saws are that they provide clean pieces of meat, which are cut efficiently and quickly. These tools are tailored in a manner, which lasts for a long period of time, and you will be able to rip of any tough part of the meat also. Therefore, it is always essential to pick out a tool that can split any hard muscle tissue of the meat. Some of the most commonly used tools are the meat cutting band saw.

The band saws are used in portioning meat and other products. It is a must in almost every meat shop. This tool is efficient enough to do all sorts of cutting jobs that are not possible with a normal knife. It is essential that we have to use these tools safely in order to avoid accidents. Some of the most important points that have to be kept in mind while using a meat cutting band saw are:

•  Ensure that you are completely trained to operate the tool safely. If you are operating it for the first time, take the help of a trained person.
•  The pusher plate can be used while feeding the meat.
•  While cutting the meat, your eyes and concentration must be on the meat.
•  After use, it is important to keep the tool on off mode.ƒ
•  Stern personal cleanliness must be maintained in order to avoid infections.
•  Keep your work area and the floor clean and slip-free.ƒƒ
•  It is essential to wear an eye protection while working with the tool.ƒ
•  You should not operate the saw without adjusting the height of the blade guard.
•  The meat saw must not be operated while wearing long and loose clothes and accessories.   
•  You should start cleaning the table only after the machine stops operating.  Do not clean when the machine is working.
•  You can get easily distracted, while cutting the meat. Therefore it is essential to concentrate on the process until it is complete. This will save you from hazards.